FLUKE® 787™ and 789™ ProcessMeters

A Digital Multimeter and Loop Calibrator in One Tool

Convenient hand-held units are fast and easy to use. Ideal tool for troubleshooting and calibrating current loop applications.
Specifications: The 1000V, 440mA 787 ProcessMeter has a clear LCD with backlight (4000 counts) so you can see and read digital multimeter in dimly lit areas. It measures, sources and simulates DC loop current with .05% accuracy and mA resolution. Minimum, maximum, average, hold and relative modes. 1000V overload protection on V, ohms, frequency and 150V overload protection on mA, backed by a 440mA 1000V fuse. Externally accessible battery for easy changes. Meter includes protective yellow holster with Flex-Stand™, safety designed test lead set, alligator clips, one 9V battery, users manual and quick reference guide. The 789 ProcessMeter has a built-in, 250 ohm selectable HART® resistor and supplied by 24V loop power. Dual display is 100% larger. Features 1200 ohm drive capability on mA source. Select from two brightness settings on backlight. 0 - 100% mA span check buttons let you toggle between 4 - 20 mA. Infrared I/O serial port is compatible with FlukeView® Forms Software Version 2.1. External fuses are easy to replace. Includes test lead set, alligator clips, four AA alkaline batteries (installed), users manual and quick reference guide.
Compliance: Both meet 1000V IEC 1010 Cat. III standards.